CNC Mill

From Site 3 coLaboratory Wiki
Revision as of 22:47, 10 December 2013 by Kiwano (Talk | contribs) (Created page with "== General Information == The mill is a Wells Index FIXME:name/number, which has had FIXME:modifications == Specifications == FIXME: Include specs == Special Instructions =...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

General Information

The mill is a Wells Index FIXME:name/number, which has had FIXME:modifications


Specifications

FIXME: Include specs


Special Instructions

The speed of the spindle should be controlled by software, rather than by using the levers on the gearbox.

  • To start the spindle, issue the command M03 Sxxxx were xxxx is the spindle speed in RPM
  • To stop the spindle, issue the command M05 or click the spindle start/stop button
  • To start the spindle counterclockwise (for left-handed tools), issue the command M04 Sxxxx