Die grinder

From Site 3 coLaboratory Wiki
Revision as of 12:34, 19 January 2014 by Kiwano (Talk | contribs) (added page for die grinder)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

The die grinder belongs to Kris Coward. It has a 2.0A motor, and came with a collet which allows it to accept tools with a 1/4" shank. Kris has also fabricated a collet which allows it to accept tools with a 1/8" shank. The burrs and other tools in the grinder box also belong to Kris and are semi-consumable. If you wear one of the tools out (or wear it down significantly), replace it.