View source for Laser Cutter (small)

{{Stub}}
== General Information ==

The laser cutter is a Gwieke FIXME:model, which uses [http://am.co.za/laser/trucut Laser Cut 5.3 Software]. The laser requires training before use. The laser belongs to the shop.

== Specifications ==

FIXME: Include specs


== Special Instructions ==

For detemining whether a workpiece is suitable for use in the laser (and what settings are needed to cut it), consult the page on [[Laser Settings]], and for a refresher on instructions after taking the course, consult the page on [[Laser Instructions]].

For a list of topics relevant to using the shop's laser cutter, see [[:Category:Laser cutter]].

[[Category:Laser cutter]]