Laser Cutter (small)

From Site 3 coLaboratory Wiki
Revision as of 10:36, 16 March 2015 by Kiwano (Talk | contribs) (Added links to settings and instructions)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

This page is a stub. You can help the wiki by expanding it.

General Information

The laser cutter is a Gwieke FIXME:model, which uses Laser Cut 5.3 Software. The laser requires training before use. The laser belongs to the shop.


FIXME: Include specs

Special Instructions

For detemining whether a workpiece is suitable for use in the laser (and what settings are needed to cut it), consult the page on Laser Settings, and for a refresher on instructions after taking the course, consult the page on Laser Instructions.

For a list of topics relevant to using the shop's laser cutter, see Category:Laser cutter.