Difference between revisions of "Laser Settings"

From Site 3 coLaboratory Wiki
Jump to: navigation, search
Line 5: Line 5:
 
|-
 
|-
 
| Cardboard, uncorrugated || Cut || ? || ? || ? || ? || ? || ? || ? ||
 
| Cardboard, uncorrugated || Cut || ? || ? || ? || ? || ? || ? || ? ||
 +
|-
 +
| Posterboard (12 ply) || Cut || 30 || 75 || 1 || ? || ? || Rod || 2011-Dec-2 ||
 +
|-
 +
| Posterboard (12 ply) || Medium engrave || 400 || 30 || 1 || ? || ? || Rod || 2011-Dec-2 ||
 +
|-
 +
| Foamcore, 3/16 || Cut || 35 || 35 || 2 || ? || ? || Rod || 2011-Dec-2 ||
 
|-
 
|-
 
| Acrylic, 3mm || Cut || 3 || 100 || 1 || Dying  || Sooty || David || 2011-Nov-12 ||
 
| Acrylic, 3mm || Cut || 3 || 100 || 1 || Dying  || Sooty || David || 2011-Nov-12 ||

Revision as of 08:14, 3 December 2011

Material Engrave depth/cut Speed Power Passes Age of Laser Laser Focus and Cleaness Tested by Date Notes
Cardboard, corrugated Cut 60 40 2 Old Sooty Jonathan 2011-Nov-15
Cardboard, uncorrugated Cut  ?  ?  ?  ?  ?  ?  ?
Posterboard (12 ply) Cut 30 75 1  ?  ? Rod 2011-Dec-2
Posterboard (12 ply) Medium engrave 400 30 1  ?  ? Rod 2011-Dec-2
Foamcore, 3/16 Cut 35 35 2  ?  ? Rod 2011-Dec-2
Acrylic, 3mm Cut 3 100 1 Dying Sooty David 2011-Nov-12
Acrylic, 3mm Light engrave  ?  ?  ?  ?  ?  ?  ?
Acrylic, 3mm Deep engrave  ?  ?  ?  ?  ?  ?  ?
Paper Cut  ?  ?  ?  ?  ?  ?  ?
Acrylic, 3mm Etching 220 55 1 Dying Cleaned David 2011-Nov-26
Acrylic, 3mm Cut 3.1 100 1 Dying Cleaned David 2011-Nov-26
Acrylic, 6mm Cut 2.75 100 2 Dying Cleaned David 2011-Nov-26

Forbidden materials

  • Anything not explicitly approved
  • PVC
  • Vinyl
  • Polycarbonate (not forbidden, but will not cut)
  • Untested plastics